Call (480) 833-0901

Mazda

/Mazda

We Service and Repair Most Mazda Cars and Trucks

2007 Mazda MX-5 Miata

2019-05-07T22:01:03+00:00

Mazda MX-5 Miata

Mileage
74,580
Service Date
4/26/2019
Services Performed
  • Lube chassis (If applicable) Install new oil filter Change oil up to 5 qts. Perform 27 pt. inspection. See attached check-list Top off fluids underneath hood as needed. Set front and rear tire pressure to spec. Measure tire tread depth Test battery (if accessible) See attached print-out Reset oil life, service reminder, maintenance reminder, or service interval Wash front and rear exterior windows
  • Install self tapping oil drain plug, clean off residue, and recheck for oil leakage.
 
Loc C. gave our service a 5 star review on 5/2/2019
2007 Mazda MX-5 Miata 2019-05-07T22:01:03+00:00

2013 Mazda 3

2019-03-24T22:00:36+00:00

Mazda 3

Mileage
68,098
Service Date
3/16/2019
Services Performed
  • Per customer request to loosen front driver side door lock mechanism 3 screws.
 
Micah M. gave our service a 5 star review on 3/22/2019
2013 Mazda 3 2019-03-24T22:00:36+00:00

2007 Mazda 3

2018-01-26T01:20:43+00:00

Mazda 3

Mileage
178,760
Service Date
11/4/2017
Services Performed
  • Lube chassis (If applicable) Install new oil filter Change oil Perform 27 pt. inspection Test battery (If accessible) Top off fluids underneath hood only (If needed) Set front and rear tire pressure to spec.
  • Remove wheels from vehicle. Inspect brakes. Computer spin balance and rotate. Reinstall wheels to vehicle and torque lug nuts to manufacturer's specifications. Check and set tire pressue to spec if needed.
  • Measured front brake rotors. Current measurements: Front left brake rotor- .905 in. Front right brake rotor- .908 in. Both front brake rotor surface have ridge build-up and are below factory discard. Normal thickness should be: NS Minimum machining should be: .940 in. Discard at or under: .910 in.
  • Measured rear brake rotors. Current measurements: Rear left brake rotor- .368 in. Rear right brake rotor- .367 in. Normal thickness should be: NS Minimum machining should be: .390 in. Discard at or under: .354 in. Rear right brake rotor surface has ridge build-up and heat spots andwill be below factory spec. after required machining. Rear left brake rotor surface has slight heat spot. Will be below discard after required machining.
  • Torqued all wheels to spec.
 
Jalen T. gave our service a 5 star review on 11/7/2017
2007 Mazda 3 2018-01-26T01:20:43+00:00

2012 Mazda 3

2018-01-26T01:20:42+00:00

Mazda 3

Mileage
238,901
Service Date
10/28/2017
Services Performed
  • Lube chassis (If applicable) Install new oil filter Change oil up to 5 qts. Perform 27 pt. inspection. See attached check-list Top off fluids underneath hood as needed. Set front and rear tire pressure to spec. Measure tire tread depth Test battery (if accessible) See attached print-out Reset oil life, service reminder, maintenance reminder, or service interval Wash front and rear exterior windows
 
Ken P. gave our service a 5 star review on 11/14/2017
2012 Mazda 3 2018-01-26T01:20:42+00:00